• Punët
• Rreth nesh
• Për punëdhënësit

The UH-60 Sheetmetal Mechanic 2 performs, and inspects aviation unit (AVUM), intermediate (AVIM) and depot maintenance on assigned aircraft.

• Assemble structural parts and components to meet requirements.
• Perform structural repair, modification, and corrosion protection treatment with respect to original strength, weight, and contour to maintain structural integrity.
• Assemble repairs using special fasteners and adhesives.
• Ability to use jigs, fixtures, forms, and molds.
• Use metalworking equipment and tools to form, cut, bend, and fasten replacement or repair parts to damaged structures and components.
• Inspect and troubleshoot to determine cause of malfunctions; disassembles to point of trouble; adjust, repair, realign, fabricate, or replace defective components or assemblies.
• Incorporate authorized modifications and changes.
• Maintain and inspect tools and equipment.
• Assess damage to aircraft structural components.
• Check repairs for serviceability according to specifications and technical publications.
• Treat corrosion using mechanical and chemical procedures.
• Store, handle, and dispose of hazardous waste and materials according to environmental standards.
• Post entries and maintain maintenance and inspection records.
• Input, validate, and analyze data processed to automated systems. Clears and closes out completed maintenance discrepancies in automated maintenance systems.
• Recommend methods to improve equipment performance and maintenance procedures.
• Prepare forms and records related to aircraft maintenance.
• Perform additional duties as required.
• Perform other qualified duties as assigned.

Minimum Requirements:

• High School Graduate or equivalent is required.
• U.S. military technical school or specialized training course is desired.
• UH60A/L experience is a requirement.
• Valid FAA A&P or FCC License preferred, and Two (2) years aviation maintenance experience, three (3) years rotary wing aircraft experience, and Two (2) years on the assigned UH-60 (MDS).
• All experience must be within the Five (5) most recent years is required.
• If No A&P or FCC License, must have the following experience:
• Three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience, and Two (2) years on the assigned UH-60 MDS.
• All experience must be within the Six (6) most recent years.
• Must have a Valid US Passport, with a minimum of 18 months remaining to expiration.
• Ability to obtain/maintain Security Clearance (NAC-I T1) Public Trust. Interim NACI approved to start. US Citizenship is required to obtain facility credentials and Public Trust Clearance.
• Travel: As required in support of task order.

Preferred Qualifications:

• UH60M recent experience is preferred.

Knowledge & Skills

• Broad knowledge of aircraft sheet metal/structural modifications and repair.
• Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
• Working knowledge of technical publications and Logistics Information Systems.
• Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.
• Participate in maintenance test flights and operation checks as required.
• Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
• The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Physical Requirements/Working Environment

• Must be able to climb, stand, stoop, bend, stretch, crouch, and work in tiring and uncomfortable positions.
• Frequently lift parts and equipment up to 20 pounds.
• Occasionally lift objects up to 50 pounds.
• Must be immediately deployable to potential combat areas worldwide.

The UH-60 Sheetmetal Mechanic 2 performs, and inspects aviation unit (AVUM), intermediate (AVIM) and depot maintenance on assigned aircraft.

• Assemble structural parts and components to meet requirements.
• Perform structural repair, modification, and corrosion protection treatment with respect to original strength, weight, and contour to maintain structural integrity.
• Assemble repairs using special fasteners and adhesives.
• Ability to use jigs, fixtures, forms, and molds.
• Use metalworking equipment and tools to form, cut, bend, and fasten replacement or repair parts to damaged structures and components.
• Inspect and troubleshoot to determine cause of malfunctions; disassembles to point of trouble; adjust, repair, realign, fabricate, or replace defective components or assemblies.
• Incorporate authorized modifications and changes.
• Maintain and inspect tools and equipment.
• Assess damage to aircraft structural components.
• Check repairs for serviceability according to specifications and technical publications.
• Treat corrosion using mechanical and chemical procedures.
• Store, handle, and dispose of hazardous waste and materials according to environmental standards.
• Post entries and maintain maintenance and inspection records.
• Input, validate, and analyze data processed to automated systems. Clears and closes out completed maintenance discrepancies in automated maintenance systems.
• Recommend methods to improve equipment performance and maintenance procedures.
• Prepare forms and records related to aircraft maintenance.
• Perform additional duties as required.
• Perform other qualified duties as assigned.

Minimum Requirements:

• High School Graduate or equivalent is required.
• U.S. military technical school or specialized training course is desired.
• UH60A/L experience is a requirement.
• Valid FAA A&P or FCC License preferred, and Two (2) years aviation maintenance experience, three (3) years rotary wing aircraft experience, and Two (2) years on the assigned UH-60 (MDS).
• All experience must be within the Five (5) most recent years is required.
• If No A&P or FCC License, must have the following experience:
• Three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience, and Two (2) years on the assigned UH-60 MDS.
• All experience must be within the Six (6) most recent years.
• Must have a Valid US Passport, with a minimum of 18 months remaining to expiration.
• Ability to obtain/maintain Security Clearance (NAC-I T1) Public Trust. Interim NACI approved to start. US Citizenship is required to obtain facility credentials and Public Trust Clearance.
• Travel: As required in support of task order.

Preferred Qualifications:

• UH60M recent experience is preferred.

Knowledge & Skills

• Broad knowledge of aircraft sheet metal/structural modifications and repair.
• Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
• Working knowledge of technical publications and Logistics Information Systems.
• Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.
• Participate in maintenance test flights and operation checks as required.
• Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
• The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Physical Requirements/Working Environment

• Must be able to climb, stand, stoop, bend, stretch, crouch, and work in tiring and uncomfortable positions.
• Frequently lift parts and equipment up to 20 pounds.
• Occasionally lift objects up to 50 pounds.
• Must be immediately deployable to potential combat areas worldwide.